Splashy Tota Installation
Turn Off water Supply
Locate the water shut-off valve near your toilet and turn it clockwise to close it. This will stop the water flow to your toilet.
Remove Toilet Seat
Unscrew the bolts holding your toilet seat in place at the back of the bowl. Lift the seat off and set it aside.
Install Your T Valve
Unscrew the flexible hose from the base of the toilet tank. Attach the T-valve to the tank where the hose was connected. Reattach the hose to the bottom of the T-valve. Ensure all connections are tight but do not over-tighten.
Attach The Bidet
Place the bidet on the toilet rim, aligning it with the holes for the
seat bolts. Secure the bidet in place using the same bolts you removed from the toilet seat.
Connect The water Supply Hose
Take the flexible hose that came with your bidet and connect one end to the bottom of the T-valve. Then, attach the other end to the inlet on the bidet attachment. Ensure both connections are snug to prevent leaks.
Splashy Tota: Feel the Freshness
With a simple turn, activate a world of freshness. Splashy Tota makes every visit to the bathroom a refreshing escape.
Splashy Tota
Stop Using Paper !
In just 8 minutes of installation You can change the future of ur butt forever